D-Link DGS-1210 Series - Security > Dos Prevention Settings

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
94
SSL Ciphersuite:
CipherSuits Key Exchange/Authentication Encryption Bit Length
ECDHE-RSA-AES128-SHA ECDHE/RSA AES 128
ECDHE-RSA-AES256-SHA ECDHE/RSA AES 256
RSA-AES128-SHA RSA AES 128
RSA-AES256-SHA RSA AES 256
RSA-AES128-GCM-SHA256 RSA AES 128
RSA-AES256-GCM-SHA384 RSA AES 256
ECDHE-RSA-AES128-GCM-
SHA256
ECDHE/RSA AES 128
ECDHE-RSA-AES256-GCM-
SHA384
ECDHE/RSA
AES 256
ECDHE-RSA-CHACHA20-
POLY1305-SHA256
ECDHE/RSA
ChaCha stream cipher and
Poly1305 authenticator
256
Enter https://10.90.90.90 to re-login the Web management page:
Figure 4.118 – Security > SSL Settings – HTTPS enable
Security > DoS Prevention Settings
The user can enable or disable the prevention of each DoS attacks. As long as user enables DoS Prevention,
switch can stop the packet matching DoS Attachk Prevention type listed on below table. The packet
matching will be done by hardware.
Figure 4.119 – Security > DoS Prevention Settings