D-Link DGS-1210 Series - ACL > ACL Access Group

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
1
1
1
1
7
7
Figure 4.147 - ACL > ACL Access List – Add ACL Profile
Access-List: Specifies the access list name for the ACL profile to be added.
Packet Type: Specifies the packet type to be MAC, IPv4, IPv4 Exdended or IPv6 then click Apply button.
To modify an existing rule, click Edit Rules button and ACL Access list table will be displayed. Please click
on the Sequence No. hyperlink.
Figure 4.148 - ACL > ACL Access List – Update ACL Profile
ACL > ACL Access Group
The ACL Access Group page allows user to configure the ACL access group settings.