D-Link DGS-1210 Series User Manual

5 Surveillance Mode Configuration D-Link Smart Managed Switch User Manual
144
Figure 5.23 – Surveillance Mode > Tools Menu > Firmware Information
Flash Information
The Flash Information displays the flash detail information of the Switch.
Figure 5.24 – Surveillance Mode > Tools Menu > Flash Information
Tool Bar > Save
Select to save the entire configuration changes to configuration ID 1 or 2 you have made to the device to
switch’s non-volatile RAM. Or save the log entries to your local drive and a pop-up message will prompt you
for the file path. You can view or edit the log file by using text editor (e.g. Notepad).
Figure 5.25 – Surveillance Mode > Save
Specifies the configuration ID 1 or 2 to be saved and click the Save Config button to implement changes
made.
Click the Backup Log button to save the current settings to your disk.
Tool Bar > Help
By clicking the Wizard button to access the built-in Surveillance Help window.

D-Link DGS-1210 Series Specifications

General

Model	DGS-1210 Series
Uplink Ports	2/4 (varies by model)
VLAN Support	Yes
QoS	Yes
Management	Web-based
Dimensions	Varies depending on the model
Weight	Varies depending on the model
Operating Temperature	0°C to 45 °C
Power Consumption	Varies depending on the model
Certifications	CE, FCC, RoHS
Port Count	24, 48 (varies by model)
Gigabit Ethernet Ports	24, 48 (varies by model)
PoE Support	Available on some models (DGS-1210-28P, DGS-1210-52P, etc.)
Jumbo Frame Support	Yes, up to 9, 216 Bytes
Storage Temperature	-40°C to 70°C