D-Link DGS-1210 Series - Show Ipif; Show Switch

6 Command Line Interface D-Link Smart Managed Switch User Manual
156
DGS-1210-52MP>
show ipif
Purpose To display the configuration of an IP interface on the Switch.
Syntax show ipif [<ipif_name>]
Description The show ipif command displays the current IP address of the
switch.
Parameters <ipif_name> − Specifies the IP interface name to be displayed.
Restrictions None.
Example usage:
To display IP interface settings:
DGS-1210-52MP> show ipif
IP Setting Mode : Static
Interface Name : System
Interface VLAN Name : default
IP Address : 10.90.90.90
Subnet Mask : 255.0.0.0
Default Gateway : 0.0.0.0
DHCPv6 Client State : Disabled
DGS-1210-52MP>
show switch
Purpose To display the information of the Switch.
Syntax show switch
Description The show switch command displays the status of the switch.
Parameters None.
Restrictions None.
Example usage:
To display the switch information:
DGS-1210-28MP> show switch
System name :
System Contact :
System Location :
System up time : 2 days, 0 hrs, 0 min, 52 secs
System Time : 02/01/2020 23:59:50
System hardware version : F2