4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
6
6
9
9
MLD Snooping VLAN Settings List:
Click the number of VLAN ID to modify the settings:
Figure 4.76 – L2 Functions > Multicast > Multicast Forwarding
State: Specifies the state of MLD Snooping VLAN to be enabled or disabled.
Querier State: Specifies the querier state to be enabled or disabled.
Fast Leave: Specifies the fast leave feature to be enabled or disabled.
Click Apply to implement changes made.
Static Router Ports: Selects the ports to be static router ports and assigned for MLD snooping for the VLAN.
Dynamic Router Ports: Select the ports to be dynamic router ports and assigned for MLD snooping for the
VLAN.
Click the Apply button to implement changes made.
L2 Functions > Multicast > Multicast Forwarding
Multicast Forwarding features allow user to create static forward rule for particular multicast packets to
designated port interface(s).
Figure 4.77 – L2 Functions > Multicast > Multicast Forwarding
VID: The VLAN ID of the VLAN to which the corresponding MAC address belongs.
Multicast MAC Address: The MAC address of the static source of multicast packets. This must be a
multicast MAC address.
To Next Page
Loading...
