Need help?Do you have a question about the D-Link DGS-1210-10MP and is the answer not in the manual?
Explains the meaning of each LED indicator on the switch for status monitoring.
Step-by-step instructions for configuring the switch using the Smart Wizard utility.
Overview of the main web interface layout: Tool Bar, Function Tree, and Main Screen.
Configuration of IP address, system name, location, and login timeout.
Configuration of port speed, duplex mode, MDI/MDIX, and flow control.
Configuration of 802.1Q VLANs for network segmentation.
Global settings for enabling and configuring Voice VLAN features.
Configuration of Spanning Tree Protocol global parameters.
Secures ports by limiting MAC address learning and controlling access.
Protects the network by preventing ARP spoofing attacks.
Configuration for secure shell access, including state and session parameters.
Configuration for integrating with a RADIUS server for centralized authentication.
Wizard for creating Access Control Lists (ACLs) to filter network traffic.
Configuration of overall Power over Ethernet (PoE) power budget and settings.
Global configuration for Simple Network Management Protocol (SNMP).
Configuration of surveillance VLAN, IP settings, and log server.
To Next Page
General