D-Link DGS-1210 Series - Tool Bar > Save Menu; Save Configuration; Save Log; Tool Bar > Tools Menu

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
3
3
1
1
Tool Bar > Save Menu
The Save Menu provides Save Configuration and Save Log functions.
Figure 4.7 – Save Menu
Save Configuration
Select to save the running configuration into non-volatile RAM to specific configuration ID user selected.
Figure 4.8 – Save Configuration
Save Log
Save the log information to local drive. The destination location and file name can be specified via pop-up
message.
Figure 4.9 – Save Log
Tool Bar > Tools Menu
The Tools Menu offers global function controls such as Reset, Reset System, Reboot Device, Configuration
Backup & Restore, Firmware Backup & Upgrade and Flash Information.
Figure 4.10 – Tool Menu
Reset
Reset mechanism erased the current configuration set (except interface IP address) in non-volatile RAM.
Figure 4.11 – Tool Menu > Reset
Reset System
Reset System mechanism erased BOTH configuration sets in non-volatile RAM. The device returned to
factory default state after reboot.