4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
30
Web-based Management
The very first page shown when exit the Smart Wizard:
Figure 4.6 – Web-based Management
The above image is the Web-based Management screen. The three main areas are the Tool Bar on top, the
Function Tree, and the Main Configuration Screen.
Item Area Description
Tool Bar
To provide a quick and convenient way for essential utility functions
like firmware and configuration management.
Function Tree
By choosing different functions in the Function Tree, user can change
all the settings in the Main Configuration Screen.
Main Configuration Screen
To display the current status of the Switch by clicking the model name
on top of the function tree.
At the upper right corner of the screen the username and current IP address will be displayed.
Under the username is the Logout button. Click this to end this session.
NOTE: If web browser closed without execute
Logout, it will be considered as an abnormal exit
and the management session will still be occupied.
Finally, by clicking on the D-Link logo at the upper-left corner of the screen the page will be redirected to the
local D-Link website.
To Next Page
Loading...
