4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
104
Figure 4.133 - ACL > ACL Wizard – Select Packet Type
Select packet type based on MAC address, IPv4 address, IPv6 address or packet content. This will change
the window according to the requirements for the type of profile.
MAC: Defines the ACL profile Layer 2 protocols. Select MAC to monitor MAC address of each packet.
IPv4: Defines the IPv4 ACL profile protocols. Select IPv4 to monitor IPv4 address of each packet.
IPv6: Defines the IPv6 ACL profile protocols. Select IPv6 to monitor IPv6 address of each packet.
NOTE: Access Control List (ACL) rule(s) does NOT applied
to traffic toward/outward System MAC/IP address. DGS-
1210 Series does NOT support CPU ACL feature.
• To define the MAC ACL Rule: Select MAC click Next button. The updates to show the follows:
To Next Page
Loading...
