11D-Link DGS-2208 User Manual
Section 2 - Product Overview
Features
The DGS-2208 8-port 10/100/1000BASE-T Gigabit Ethernet Switch was designed for easy installation and high
performance in an environment where traffic on the network and the number of users increase continuously.
• Eight (8) 10/100/1000BASE-T Gigabit Ethernet ports
• Cable Diagnostic function at Switch boot up
• Supports Auto-Negotiation for 10/100/1000Mbps and duplex mode
• Supports Auto-MDI/MDIX for each port
• Supports Full/Half duplex transfer mode for 10 and 100Mbps
• Supports Full-duplex transfer mode for 1000Mbps
• Supports IEEE 802.1p Priority Queuing, up to 4 queues
• Full wire speed reception and transmission
• Store-and-Forward switching method
• Supports 8K absolute MAC addresses
• Extensive front-panel diagnostic LEDs
• Jumbo frame support (9.6Kbytes)
• IEEE 802.3x flow control for full duplex
• Back pressure flow control for half duplex
To Next Page
