DGS-3100 Series Gigabit Stackable Managed Switch User Manual
62
Telnet Setting
The Telnet Setting allows users to enable or disable Telnet on the device. To enable or disable Telnet:
1. Click Configuration > Telnet Setting. The Telnet Setting opens:
Figure 0-23. Telnet Setting Page
The Telnet Setting contains the following fields:
Field Description
Telnet Setting
Defines the Telnet status on the device. The possible values are:
• Enabled – Enables Telnet.
• Disabled – Disables Telnet.
2. Select the Telnet Setting.
3. Click
. The Telnet setting on the device is updated.
To Next Page
Loading...
Need help?
General