D-Link DHP-600AV - Technical Specifications

To Next Page

To Previous Page

18D-Link DHP-600AV/DHP-601AV User Manual

Appendix A - Technical Specications

Technical Specications

1 Maximum throughput is based on theoretical transmission PHY rate. Actual data throughput will vary. Network conditions and environmental factors, including volume of trac and network overhead, may lower actual data throughput rate. Interference from devices that emit electrical

noise, such as vacuum cleaners and hair dryers, may adversely aect the performance of this product. This product may interfere with devices such as lighting systems that have a dimmer switch or a touch-sensitive on/o feature, short wave radios, or other Powerline devices that do not

follow the HomePlug AV standard.

2 Power outlets and electrical wiring must all be part of the same electrical system. Certain electrical conditions in your home, such as wiring condition and conguration, may aect the performance of this product. Additional D-Link Powerline AV series products are required to add new devices

to the network. A minimum of two D-Link Powerline AV series products are required to create a network. Connecting this product to a power strip with a surge protector may adversely aect the performance of this product. For best results, plug the adapter directly into a wall outlet.

General

Powerline Interface • Power plug (country-dependent)

Ethernet Interface • Gigabit Ethernet LAN port • RJ-45 connector

Functionality

Standards • IEEE 802.3

• IEEE 802.3u

• IEEE 1901

• HomePlug AV2

Security • 128-bit AES data encryption

LEDs • Power

• Ethernet

• Powerline