D-Link DHP-700AV - Power Saving Mode

10D-Link DHP-700AV / DHP-701AV User Manual
Section 2 - Hardware Installation
5. You may now connect another device to the DHP-700AV adapter using an Ethernet cable. Verify that the Ethernet LED is lit. Your hardware
installation is complete.
Power Saving Mode
The DHP-700AV will automatically go into Power Saving Mode when there is no activity for ve minutes. The Power LED will blink intermittently
while the device is in Power Saving Mode.
Note: D-Link PowerLine devices cannot be congured while in Power Saving Mode.
5V
2.5A
USB
WPS
1
2
3
4
INTERNET
POWER
DHP-600AV
Router
Internet
DHP-700AV
Powerline AV2 2000
DHP-700AV
Powerline AV2 2000