D-Link DHP-P306AV - Push Button Security

9D-Link DHP-P306AV User Manual
Section 2 - Installation
Understanding PowerLine AV Passthrough Adapter Security
The PowerLine AV Passthrough Adapters on the same network must use an identical encryption key. The default encryption key
of each PowerLine AV Passthrough Adapter is HomePlug AV. All PowerLine AV Passthrough Adapters with default encryption
key can communicate with each other.
It’s recommended to create a private encryption key for network security purpose. The private encryption key allows you to
protect your network from unauthorized access via the PowerLine network. To create a private encryption key instead of the
default encryption key, please follow below steps:
1. All Adapters
Plug in all the adapters to be congured and make sure each device’s encryption key is set to HomePlug AV (default value). If
the encryption key is not set to the default value, press the reset button for 1 second for resetting it to the default value.
2. First Adapter
Press Simple connect button of the rst adapter for no more than three seconds.
The Power LED will start blinking after you release the button. The adapter will create a private, randomly generated encryption
key that each PowerLine AV Passthrough Adapter will use.
3. Second Adapter
Push Button Security