18
Using the Configuration Menu (continued)
Home > DHCP
DHCP stands for Dynamic Host Control Protocol. The DI-624 has a built-in DHCP
server. The DHCP Server will automatically assign an IP address to the computers on
the LAN/private network. Be sure to set your computers to be DHCP clients by setting
their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your
computers on, they will automatically load the proper TCP/IP settings provided by the
DI-624. The DHCP Server will automatically allocate an unused IP address from the
IP address pool to the requesting computer. You must specify the starting and ending
address of the IP address pool.
DHCP Server-
Select Enabled or Disabled. The default setting is Enabled.
Starting
IP Address-
The starting IP address for the DHCP server’s IP assignment
Ending
IP Address-
The ending IP address for the DHCP server’s IP assignment
Lease Time-
The length of time for the IP lease. Enter the Lease time. The
default setting is one hour
DI-754
To Next Page
Loading...
