23
Using the Configuration Menu (continued)
Advanced > Filters > IP Filters
Filters are used to deny or allow LAN (Local Area Network) computers from accessing
the Internet. The DI-624 can be setup to deny internal computers by their IP or MAC
addresses. The DI-624 can also block users from accessing restricted web sites.
This is the schedule of time when the IP Filter will be
Schedule:
Select the protocol type.
Protocol Type:
Use IP Filters to deny LAN IP addresses from accessing the
Internet. You can deny specific port numbers or all ports for
the specific IP address.
IP Filters:
The single port or port range that will be denied access to the
Internet.
Port:
The IP address of the LAN computer that will be denied
access to the Internet.
IP:
To Next Page
Loading...
