32
Using the Configuration Menu (continued)
Tools > Time
Time Zone-
Select the Time Zone from the pull-down menu.
Daylight
Saving-
To select Daylight Saving time manually, select enabled or
disabled, and enter a start date and an end date for daylight
saving time.
Set the Time-
To manually input the time, enter the values in these fields for the
Year, Month, Day, Hour, Minute, and Second. Click Set Time.
Default
NTP Server-
NTP is short for Network Time Protocol. NTP synchronizes
computer clock times in a network of computers.
This field is optional.
To Next Page
Loading...
