.
-2-
First, plug in the power supply
as shown.
The Power LED will turn “on”
to indicate proper operation.
Using CAT5 UTP cable, connect
computers that are equipped with
Ethernet adapters to one of the four
Ethernet LAN ports on the DI-714.
The LED for the specific
Local Ethernet Port will light up
to indicate connection.
Next, using a CAT5 UTP cable,
connect the Broadband (WAN) port to
the Cable or DSL modem.
The Broadband LED will light up to
indicate connection.
Connecting the DI-714 Wireless
Router to your network
To Next Page
Loading...
Need help?
General
