117
Frequently Asked Questions (continued)
Step 17 Select 1 out of the Proposal
ID dropdown menu and click Add To,
which will add the proposal that was just
configured to the IPSec Proposal Index.
Click Apply and then click Restart.
Next you need to configure the DI-804V router.
Step 1 Access the router’s web configuration by entering the router’s IP address in
your web browser. The default IP address is 192.168.0.1. Login using your password.
The default username is “admin” and the password is blank.
Step 2 Click on Basic Setup and then select Device IP Settings on the left.
Step 3 Change the LAN IP address so
that it is on a different subnet than the
LAN of the DI-804HV.
Step 4 Click Next until you reach the
Save & Restart screen. Click Save &
Restart and then click Basic Setup once
the unit has rebooted.
Step 5 Click on VPN Settings.
How can I establish a VPN connection with a DI-804V router?
(continued)
To Next Page
Loading...
