119
Frequently Asked Questions (continued)
After you have configured both routers, you need to establish a connection.
Step 5 When the VPN has been
established the Status will be Active.
Step 1 Open a command prompt and
from a computer on the internal LAN of
the DI-804HV and ping the IP address of
a computer that is on the internal LAN
of the DI-804V, or vice versa.
Step 2 Once you begin to receive
replies, the VPN connection has been
established.
Step 3 To view the Status of the VPN
on the DI-804V, click on Device Status.
Step 4 From the Device Status screen
click on VPN Status.
How can I c with a DFL-300 firewall?
You need to first configure your DI-804HV router.
Step 1 Log into the web based configuration of the router by typing in the IP address of
the router (default: 192.168.0.1) in your web browser. By default the username is “admin”
and there is no password.
Step 2 Click the VPN button on the left column, select the checkbox to Enable the
VPN, and then in the box next to Max. number of tunnels, enter the maximum numbers
of VPN tunnels that you would like to have connected.
How can I establish a VPN connection with a DI-804V router?
(continued)
To Next Page
Loading...
