123
Step 17 Select 1 out of the Proposal
ID dropdown menu and click Add To,
which will add the proposal that was just
configured to the IPSec Proposal Index.
Click Apply and then click Restart.
Frequently Asked Questions (continued)
Next you need to configure the DFL-300 firewall.
Step 1 Access the configuration screen of the DFL-300 by opening a web browser
such as Internet Explorer and type the IP address of the DFL-300 in the address bar
(192.168.1.1).
Step 2 Enter the username (admin) and the password (admin). Click OK.
Step 3 Click on
Configuration and
take note of the IP
address that your
ISP has assigned
you.
How can I establish a VPN connection with a DFL-300 firewall?
(continued)
To Next Page
Loading...
