35
Using the Configuration Menu
Home >VPN Settings > Tunnel > Manual
Remote Subnet-
The subnet of the remote VPN gateway’s local network. It
can be a host, a partial subnet or a whole subnet.
Remote Netmask-
The subnet of the remote VPN gateway’s local network.
It can be a host, a partial subnet or a whole subnet.
Remote Gateway-
The WAN IP address of remote VPN gateway.
Local Subnet-
The subnet of the VPN gateway’s local network. It can be a
host, a partial subnet or a whole subnet.
Local Netmask-
Local netmask combined with local subnet to form a subnet
domain.
Aggressive Mode-
Enabling this mode will accelerate establishing tunnel, but
the device will have less security.
Tunnel Name- Current tunnel name.
Remote SPI-
The value of the remote SPI should be set in hex format.
Local SPI-
The value of the local SPI should be set in hex format.
Method-
The set of rules applied when connecting to the VPN gateway.
To Next Page
Loading...
