37
Home >VPN Settings > Dynamic VPN Tunnel
Using the Configuration Menu
Local Subnet-
The subnet of the VPN gateway’s local network. It can be a
host, a partial subnet or a whole subnet.
Local Netmask-
The netmask of the VPN gateway’s local network.
Aggressive Mode-
Enabling this mode will accelerate establishing the tunnel,
but the device will have less security.
Tunnel Name- Current tunnel name.
This feature works with a VPN software client so the DI-804HV
does not need to know the IP address of the remote clients.
Dynamic VPN-
There are three parts that are necessary to setup the
configuration of IKE for the dedicated tunnel: basic setup, IKE
proposal setup, and IPSec proposal setup. Basic setup
includes the setting of following items: local subnet, local
netmask, remote subnet, remote netmask, remote gateway,
and pre-shared key. The tunnel name is derived from previous
page of VPN setting. IKE proposal setup includes the setting
of a set of frequent-used IKE proposals and selecting from the
set of IKE proposals.
VPN Settings - IKE-
To Next Page
Loading...
