55
Using the Configuration Menu
Advanced > Routing
Dynamic Routing Settings allow the VPN Router to route IP
packets to another network automatically. The RIP protocol
is applied, and broadcasts the routing information to other
routers on the network regularly.
By default, it is set to disable. Check to enable (RIPv1 / RIPv2)
protocol.
Dynamic Routing-
RIP v1-
Protocol in which the IP address is routed through the internet.
RIP v2-
Enhanced version of RIP v1with added features such as Au-
thentication, Routing Domain, Next Hop Fowarding, and Subnet-
mask Exchange.
To Next Page
Loading...
