DIR-120 Ethernet Broadband Router
D-Link DIR-120 User Manual 22
Setup Wizard – Complete Setup
Finally you can confirm that the setup process is completed. If you are satisfied that you have entered all the necessary information correctly, click the Conect button to save
the new configuration settings and restart the Router. If you need to change settings from a previous menu, click the Back button.
DO NOT TURN THE ROUTER OFF WHILE IT
IS RESTARTING.
While the Router is rebooting a message
appears in the web page informing you that the
Router is restarting. When it has completed the
restart, the Status men will be displayed, it
should not be necessary to login.
To Next Page
Loading...
