D-Link DIR-2640 User Manual

113D-Link DIR-2640 User Manual
Section 5 - Wi-Fi Mesh Setup
Step 1
Connect and plug in the Wi-Fi Mesh compatible device close to your
DIR-2640 and wait for the device to be ready. Refer to the device's manual for
behavioural indications.
Step 2
Use the Ethernet cable to connect the Wi-Fi Mesh compatible device to
one of the LAN ports on the DIR-2640. Refer to the device's manual for
behavioural indications signifying that your device has nished being paired.
Note: Please make sure that the device you are pairing to is in factory default
settings prior to initiating the mesh pairing process.
Step 3
Disconnect the Ethernet cable and place the Wi-Fi Mesh compatible device
anywhere in your home to extend your whole home Wi-Fi.
< 1 m
Setup Using an Ethernet Cable

D-Link DIR-2640 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1733 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
VPN support	QuickVPN
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Antennas quantity	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Product type	Desktop/pole router
Product color	Gray
LED indicators	LAN, Power, WAN, WLAN
Flash memory	128 MB
Internal memory	256 MB
Processor cores	2
Security algorithms	WPA2-PSK
Power source type	DC
Number of products included	1 pc(s)