D-Link DIR-2640 User Manual

92D-Link DIR-2640 User Manual
Section 3 - Conguration
System Admin - Admin
In the Management menu on the bar at the top of the page, click System Admin to access the Admin page. This page will
allow you to change the administrator (Admin) password.
To congure the System settings, click the System link. Refer to System Admin - System on page 93
Click Save at any time to save the changes you have made on this page.
Admin Password
Password Enter a new password for the administrator account. You will
need to enter this password whenever you congure the
router using a web browser or the D-Link Wi-Fi app.
Advanced Settings... - Administration
Enable Remote
Management
Click the toggle to enable remote management for your router.
Remote Admin Port Specify the port number for accessing the web conguration
settings UI.
LED Control
Status LED Turn the LED status lights on or o.

D-Link DIR-2640 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1733 Mbit/s
WLAN data transfer rate (first band)	800 Mbit/s
VPN support	QuickVPN
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Antennas quantity	4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Product type	Desktop/pole router
Product color	Gray
LED indicators	LAN, Power, WAN, WLAN
Flash memory	128 MB
Internal memory	256 MB
Processor cores	2
Security algorithms	WPA2-PSK
Power source type	DC
Number of products included	1 pc(s)