D-Link DIR-2640 - Page 65

61D-Link DIR-2640 User Manual
Section 3 - Conguration
Smart Connect
Status Enable or disable the Smart Connect Feature. When enabled,
only a few conguration options are available to simplify
conguration.
If Smart Connect is Status is
Enabled:
Wireless
Wi-Fi Name (SSID) Create a name for your wireless network using up to 32
characters.
Password Create a WiFi password. Wireless clients
will need to enter
this password to successfully connect to the network.
Wireless - Advanced Settings...
Security Mode Choose None or WPA/WPA2-Personal (recommended).
Transmission Power Select the desired wireless transmission power.
Schedule Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable, or you can create your own schedules in the Schedules
section. Refer to Time & Schedule - Schedule on page 89
for more information.