DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
Wi-Fi
In this menu you can specify all needed settings for your wireless network.
Basic Settings
On the Wi-Fi / Basic settings page, you can enable your wireless local area network (WLAN)
and configure its basic parameters.
Figure 111. Basic settings of the wireless LAN.
Parameter Description
Enable Wireless
The checkbox enables Wi-Fi connections. If you want to disable
your WLAN, deselect the checkbox.
Broadcast wireless
network
If the checkbox is not selected, devices cannot connect to the router's
WLAN. Upon that the router can connect to another access point as
a wireless client.
BSSID
The unique identifier for your Wi-Fi network. You cannot change the
value of this parameter, it is determined in the device's internal
settings
Page 131 of 220
To Next Page
Loading...
