DIR-320 Wireless N150 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
USB Storage
This menu is designed to operate USB storages. Here you can do the following:
• view data on the connected USB storage
• view content of the connected USB storage
• configure the router as a print server
• configure SMB-based access to the USB storage
• enable the built-in FTP server of the router
• enable the built-in DLNA server of the router.
Information
On the USB storage / Information page, you can view data on the USB storage connected to the
router.
Figure 147. The USB storage / Information page.
The following data are presented on the page: the name, total and free space of the storage, and the
type of its file system (supported file systems: FAT16/32, NTFS, and ext2/3).
If the USB storage is divided into volumes, several values are displayed in the USB storage drop-
down list. Select the needed value to view data on the volume (partition) of the USB storage.
To safely disconnect the USB storage, click the Unmount storage button. When the
Disconnected value is displayed on the page, remove the storage from the router.
To disconnect one volume of the storage, select the needed value from the USB storage drop-
down list and click the Unmount volume button.
Page 185 of 220
To Next Page
Loading...
