D-Link DIR-612 - Traffic Control

35D-Link DIR-612 User Manual
Section 3 - Conguration
Enter the total bandwidth.
Click to enable auto trac shaping.
Select the data protocol which you want to set a QoS rule for.
Enter the source IP.
Enter the destination IP.
Enter the source port number if applicable. This box will be greyed out for certain protocols.
Enter the minimum upload speed.
Total Bandwidth
(0, Unlimited):
Auto Trac
Shaping:
Protocol:
Source IP:
Dest IP:
Source Port:
Up Floor:
Trac Control
This page allows you to congure trac bandwidth and rules for network trac.
QoS Rules
Click the Add button once to view the QoS Rules settings.