D-Link DIR-612 - Time and Date

44D-Link DIR-612 User Manual
Section 3 - Conguration
Time and Date
Enter the correct year, month, day, and time.
Select the daylight saving oset if Daylight Saving time
will be used.
Click the Apply Changes button to save the changes
and apply them.
Select Enable to enable the NTP server.
Enter the name of the NTP server.
Enter the name of the second NTP server.
Enter the time period that you want the NTP server to
synchronize time with the devices on the network. The
default value is one hour.
Select the time zone you are in from the pulldown menu.
This shows the current GMT (Greenwich Mean Time) time.
System Time:
Daylight Saving
Oset:
State:
Server:
Server2:
Interval:
Time Zone:
GMT Time:
This page allows you to edit the system time and Network Time Protocol (NTP). You can congure, update, and maintain the
correct time on the system clock, and congure Daylight Saving.
Click the Apply Changes button to save any changes made.
To start the NTP, click the Get GMT Time button to obtain the GMT time.