DIR-615 Wireless N300 Router
User Manual
Configuring via Web-based Interface
Creating PPPoE + Static IP WAN Connection
To create a connection of the PPPoE + Static IP type, click the Add button on the Net / WAN page.
On the opened page, select the PPPoE + Static IP value from the Connection Type drop-down
list and specify the needed values.
Figure 98. The page for creating a new connection. The General settings section.
Parameter Description
General settings
Interface
A physical or virtual interface to which the new connection will be
assigned.
Name
A name for connection for easier identification.
Enable
Select the checkbox to enable the connection.
Direction
The direction of this connection.
Page 117 of 208
To Next Page
Loading...
