DIR-615 Wireless N300 Router
User Manual
Configuring via Web-based Interface
PPPoE + Dynamic IP Connection
Figure 45. Configuring PPPoE + Dynamic IP WAN connection.
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough at this step to configure a connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
Page 58 of 208
To Next Page
Loading...
