DIR-615 Wireless N300 Router
User Manual
Configuring via Web-based Interface
Figure 49. Configuring PPPoE + Dynamic IP WAN connection.
In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
As a rule, the specified settings are enough to configure a connection of the selected type. If you
need to specify additional settings, open the expert settings mode. To do this, use the switch in the
bottom left corner of the page.
Page 62 of 208
To Next Page
Loading...
