D-Link DIR-803 - Product Setup; Web-Based Setup

DIR-803
3
ENGLISH
PRODUCT SETUP
WEB-BASED SETUP
Step 1
Position your DIR-803 near your Internet-connected modem and
PC. Keep the router in an open area for better wireless coverage.
Step 4
Open a browser on the connected computer. If you are not
automatically directed to the D-Link Setup Wizard, go to
‘http://dlinkrouter.local./’ and follow the onscreen instructions to
congure your DIR-803. Use ‘Admin’ as your username and leave
the password blank to congure manually.
Step 2
Unplug the modem Ethernet cable connected to your computer and
plug it into the port labeled ‘INTERNET’ on the router.
Connect the supplied power adapter to the router and a power
outlet, then verify that the power LED is on.
Step 3
Plug one end of the supplied Ethernet cable into the port labeled ‘1’
on the back of the router, and the other end into the Ethernet port on
your computer.
To set up the DIR-803 through Wi-Fi, go to your computer or mobile
device's Wi-Fi settings and select the network (ex: dlink-A8FA).
Enter Wi-Fi password (ex: akbdj19368) on the included Wi-Fi
Conguration Note.
WELCOME TO THE D-LINK SETUP WIZARD
Modem
PC
Router
Modem
Router
LAN 1234 INTERNET
RESET
PC
Modem
Router
LAN 1234 INTERNET
RESET