Need help?Do you have a question about the D-Link DIR-806A and is the answer not in the manual?
General| Brand | D-Link |
|---|---|
| Model | DIR-806A |
| Category | Wireless Router |
| Language | English |
Guides on establishing a wired connection between a PC and the router.
Provides step-by-step instructions for connecting a PC via Ethernet.
Instructions on accessing the router's configuration interface via a web browser.
A wizard to simplify the initial internet connection setup process.
Guides on establishing various types of Wide Area Network (WAN) connections.
Step-by-step configuration for establishing a PPPoE internet connection.
Configuration steps for setting up a static IP address for the WAN connection.
Instructions for configuring a dynamic IP address for the WAN connection.
Verifies the status of the configured internet connection using a ping utility.
Guides on setting up the router's wireless network parameters.
How to configure the router to act as a wireless client.
Configures virtual servers for port forwarding and external access.
Configuration section for Wide Area Network (WAN) connections.
Detailed steps to create a new PPPoE WAN connection.
Detailed steps to create a new Static IP WAN connection.
Detailed steps to create a new Dynamic IP WAN connection.
Steps to configure PPTP/L2TP connections with static IP addresses.
Steps to configure PPTP/L2TP connections with dynamic IP addresses.
Configures the router's local area network (LAN) interface settings.
Sets the router's IP address and subnet mask for the LAN.
Manages the router's built-in DHCP server for automatic IP assignment.
Configures fundamental wireless network parameters like SSID and channel.
Settings specific to the 2.4GHz wireless band.
Settings specific to the 5GHz wireless band.
Configures wireless security protocols like WPA2-PSK for network protection.
Filters network access based on MAC addresses of connected devices.
Manages Wi-Fi Protected Setup for easy device connection.
Configures the router to act as a wireless client or repeater.
Configures access to the router's web interface from external networks.
Creates rules to filter incoming/outgoing IP packets based on criteria.
Sets up virtual servers for redirecting incoming traffic to internal IP addresses.
Configures the Demilitarized Zone (DMZ) host for specific network exposure.
Filters devices based on their MAC addresses for LAN access control.
Configures rules to block or allow access to specific web addresses.
Guides on changing the administrator password for security.
Saves, restores, and backs up router configuration settings.
Instructions for updating the router's firmware for new features and fixes.
Steps to perform a firmware update from a local computer file.
Steps to perform a firmware update automatically from the internet.
Guides through basic wireless setup in Access Point mode.
Steps to configure the router to function as a wireless access point.
Configures wireless security for Access Point mode.
Configures fundamental wireless parameters in AP mode.
Configures wireless security in AP mode.
Changes the administrator password in AP mode.
Firmware update procedures in AP mode.
Steps to perform a firmware update from a local computer file.
Steps to perform a firmware update automatically from the internet.
Important safety precautions for operating the router.
Step-by-step guide for connecting the router to a modem.
To Next Page
