DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
MAC Filter
On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers
of the router's LAN.
Figure 118. The Firewall / MAC filter page.
To create a new rule for filtering, click the Add button. In the line displayed, you can specify the
following parameters:
Parameter Description
MAC address
The MAC address of a device from the router's LAN. You can enter
the MAC address of a device connected to the router's LAN at the
moment. To do this, select the relevant device from the Known
IP/MAC addresses drop-down list (the field will be filled in
automatically).
Action
Select an action for the rule.
Deny: Blocks access to the router's network for the device with the
specified MAC address.
Allow: Allows access to the router's network and to the Internet for
the device with the specified MAC when the rules on the Firewall /
IP filters page block access for this device.
After specifying the needed parameters, click the Apply button.
Page 164 of 233
To Next Page
Loading...
