DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Access Point Mode)
WPS
On the Wi-Fi / WPS page, you can enable the function for secure configuration of the WLAN and
select a method used to easily add wireless devices to the WLAN.
The WPS function helps to configure the protected wireless network automatically. Devices
connecting to the wireless network via the WPS function must support the WPS function.
!
Before using the function you need to configure one of the following authentication types:
Open with no encryption, WPA2-PSK , or WPA-PSK/WPA2-PSK mixed with the
AES encryption method (on the relevant band tab of the Wi-Fi / Security settings
page). When other security settings are specified for the band of the WLAN, controls of the
tab on the Wi-Fi / WPS page are not available.
Figure 152. The page for configuring the WPS function.
Page 205 of 233
To Next Page
Loading...
