DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
PPTP + Dynamic IP or L2TP + Dynamic IP Connection
Figure 46. Configuring PPTP + Dynamic IP WAN connection.
If your ISP has provided the addresses of the DNS servers, deselect the Obtain DNS server
addresses automatically checkbox and fill in the Primary DNS server field.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
Page 67 of 233
To Next Page
Loading...
