DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
LAN
To configure the router's local interface, proceed to the Net / LAN page.
Figure 85. Basic settings of the local interface.
If needed, edit the basic settings of the local interface.
Parameter Description
IP Address
The IP address of the router in the local subnet. By default, the
following value is specified: 192.168.0.1.
Netmask
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
When needed settings are configured, click the Apply button.
In the DHCP server section, you can configure the built-in DHCP server of the router. In the
router mode, the DHCP server is enabled by default.
Figure 86. The section for configuring the DHCP server.
Page 115 of 233
To Next Page
Loading...
