DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Access Point Mode)
Firewall
In this menu you can configure the firewall of the router switched to the access point mode.
MAC Filter
On the Firewall / MAC filter page, you can configure MAC-address-based filtering for computers
of the router's LAN.
Figure 157. The Firewall / MAC filter page.
To create a new rule for filtering, click the Add button. In the line displayed, you can specify the
following parameters:
Parameter Description
MAC address
The MAC address of a device from the router's LAN. You can enter
the MAC address of a device connected to the router's LAN at the
moment. To do this, select the relevant device from the Known
IP/MAC addresses drop-down list (the field will be filled in
automatically).
Page 216 of 233
To Next Page
Loading...
