DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
Configuring Wireless Connection
In this master section, you can configure the router's WLAN.
Figure 53. Selecting the operating mode for the wireless network.
If you are not going to use the wireless connection, select the Turn off choice of the Mode radio
button. Click the Next button and then click the Apply button on the opened page. After clicking
the button, the page for configuring the router to use an IPTV set-top box opens (see the
Configuring IPTV section, page 80). The setting will be applied to both bands of the WLAN.
If you want to connect portable devices to the Internet via wireless connection, select the Access
point choice of the Mode radio button. Click the Next button. The setting will be applied to both
bands of the WLAN.
If you want to configure the router as a client to connect to a wireless access point, select the Client
choice of the Mode radio button. Click the Next button. The setting will be applied to your
2.4GHz band WLAN. To configure the router as a client for your 5GHz band WLAN, proceed to
the Wi-Fi/Client page (see the Client section, page 138).
Page 75 of 233
To Next Page
Loading...
