DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
Flow Control
On the Advanced / Flow Control page, you can enable and disable data flow control for the
WAN port of the router.
This function is used for equal load balancing in ISPs' networks. Contact your ISP to clarify if this
function needs to be enabled.
Figure 112. The Advanced / Flow Control page.
To enable the flow control function, select the Enabled checkbox and click the Apply button.
To disable the flow control function, deselect the Enabled checkbox and click the Apply button.
Page 156 of 233
To Next Page
Loading...
