DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Router Mode)
Creating PPTP + Static IP or L2TP + Static IP WAN Connection
To create a connection of the PPTP + Static IP or L2TP + Static IP type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 79. The page for creating a new connection. The General settings and Ethernet sections.
Parameter Description
General settings
Interface
A physical or virtual interface to which the new connection will be
assigned.
Name A name for connection for easier identification.
Enable Select the checkbox to enable the connection.
Direction The direction of this connection.
Ethernet
MTU The maximum size of units transmitted by the interface.
Page 105 of 233
To Next Page
Loading...
