DIR-806A Wireless AC750 Multi-Function Router
User Manual
Configuring Device (Access Point Mode)
To activate the WPS function, select the WPS Enable checkbox on the 2.4 GHz or 5 GHz tab and
click the Apply button. When the checkbox is selected, the Information and Connection
sections are available on the tab.
Parameter Description
Default PIN code
The PIN code of the router. This parameter is used when connecting
the router to a registrar to set the parameters of the WPS function.
WPS Status
The state of the WPS function:
• Configured (all needed settings are specified; these settings
will be used upon establishing the wireless connection)
• Unconfigured (after activating the WPS function, needed
settings will be configured automatically: the MAC address of
the wireless interface will be added to the SSID, the network
authentication type will be changed to WPA2-PSK with a
random encryption key).
SSID
The name of the router's WLAN.
Network Authentication The network authentication type specified for the WLAN.
Encryption
The encryption type specified for the WLAN.
Encryption key The encryption key specified for the WLAN.
Refresh
Click the button to refresh the data on the page.
Reset to unconfigured
Click the button to generate new settings for the router's WLAN
automatically after activating the WPS function.
WPS Method
A method of the WPS function. Select a value from the drop-down
list.
PIN: Connecting the device via the PIN code.
PBC: Connecting the device via the push button (actual or virtual).
PIN Code
The PIN code of the WPS-enabled device that needs to be connected
to the wireless network of the router.
The field is displayed only when the PIN value is selected from the
WPS Method drop-down list.
Connect
Click the button to connect the wireless device to the router's WLAN
via the WPS function.
Page 206 of 233
To Next Page
Loading...
