DIR-815 Quick Installation Guide
Changing LAN IPv4 Address
This configuration step is available for the Access point, Repeater, and
Client modes.
1. Select the Automatic obtainment of IPv4 address to let DIR-815
automatically obtain the LAN IPv4 address.
2. In the Hostname field, you should specify a domain name of the router
using which you can access the web-based interface after finishing the
Wizard. Enter a new domain name of the router ending with .local or
leave the value suggested by the router.
!
I n order to access the web-based interface using the domain name, i n
the address bar of the web browser, enter the name of the router with a
dot at the end.
27
To Next Page
Loading...
