DIR-815 Quick Installation Guide
5. IPv6 address assignment. By default, the devices of the LAN
automatically assign IPv6 addresses to themselves (the Stateless value
is selected from the Mode of IPv6 address assignment drop-down
list in the Dynamic IP Addresses section on the IPv6 tab). If the
devices of the LAN do not support IPv6 address autoconfiguration, use
the built-in DHCPv6 server of the router (select the Stateful value from
the Mode of IPv6 address assignment drop-down list). If you want
to manually assign IPv6 addresses to devices of the LAN, select the
Disable value from the Mode of IPv6 address assignment drop-
down list.
6. After specifying the needed parameters on the Connections Setup /
LAN page, click the APPLY button.
40
To Next Page
Loading...
