DIR-816 Quick Installation Guide
Con#guring LAN Ports for IPTV/VoIP
This configuration step is available for the Router and WISP Repeater
modes.
1. On the IPTV page, select the Is an STB connected to the device
checkbox.
2. Select a free LAN port for connecting your set-top box.
3. If the IPTV service is provided via a VLAN channel, select the Use
VLAN ID checkbox and fill in the VLAN ID field.
4. Click the NEXT button.
5. On the VoIP page, select the In an IP phone connected to the
device checkbox.
6. Select a free LAN port for connecting your IP phone.
7. If the VoIP service is provided via a VLAN channel, select the Use
VLAN ID checkbox and fill in the VLAN ID field.
8. Click the NEXT button.
30
To Next Page
Loading...
