DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Overview
Back and Bottom Panels
Figure 2. Back panel view.
Port Description
WIFI
A button to enable/disable wireless network.
To disable the router's wireless network: with the device turned on,
press the button and release. The WLAN 2.4G and WLAN 5G LEDs
should turn off.
WPS
A button to connect mesh network devices or set up wireless
connection (the WPS function).
To connect mesh network devices: with the device turned on and
factory default settings or with the EasyMesh function enabled in the
router settings, push the button, hold it for 2 seconds, and release.
To use the WPS function: push the button, hold it for 2 seconds, and
release.
LAN 1-4
4 Ethernet ports to connect computers or network devices.
WAN
A port to connect to a cable or DSL modem or to a private Ethernet
line (it is recommended to use the cable included in the delivery
package).
POWER
A button to turn the router on/off.
Page 16 of 235
To Next Page
Loading...
